FUJIFILM Dimatix Ink Tutorial The printer is suited to print fluids (inks) containing proteins, nucleic acids, nanoparticles, conductive polymers, etc. Google sketchup pro 7 license key. The inks are filled into a disposable cartridge that has 16 individually tunable, piezo- actuated nozzles. Cartridges are available to dispense 10-pL or 1-pL drops. The Dimatix Materials Cartridge is a cartridge-based inkjet printhead used with the DMP and available in 1 pl and 10 pl drop volumes. Based on FUJIFILM Dimatix's proprietary Silicon MEMS technology, the 16-jet Dimatix Materials Cartridge is designed for high-resolution, non-contact jetting of functional fluids in a broad range of applications.
System Information
Dimatix Materials Printer (DMP)
- Flat substrate, xyz stage, inkjet deposition system
- Low cost, user-fillable piezo-based inkjet print cartridges
- Built-in drop jetting observation system
- Fiducial camera for substrate alignment and measurement Variable jetting resolution and pattern creation PC-controlled with Graphical User Interface (GUI) application software
- Capable of jetting a wide range of fluids
- Heated vacuum platen
- Cartridge cleaning station
- Includes software
Mechanical System
Printable area
– Substrate < 0.5 mm thickness: 210 mm x 315 mm (8.27 in x 12.4 in)
– Substrate 0.5 – 25 mm thickness: 210 mm x 260 mm (8.27 in x 10.2 in) Repeatability: ± 25 µm (± 0.001 in)- Substrate holder
– Vacuum platen
– Temperature adjustable; ambient to 60° C - System Footprint: 673 mm x 584 mm x 419 mm (26 in x 23 in x 16 in)
- Weight approximately 50.7 kg (111.8 lbs)
- Power 100-120/200-240 VAC 50/60 Hz 375 W maximum
- Operating range 15-40° C at 5-80% RH non-condensing
- Altitude up to 2000 mAltitude up to 2000 m
- Safety and EMC compliance
– Safety: NRTL Certified to EN 61010-1, UL 61010-1, CSA 22.2 No. 61010-1
– EMC: EN61326-1 Class A, FCC Part 15 Class A
Dimatix Materials Cartridge Price
Fiducial Camera
- Allows substrate alignment using reference marks
- Allows positioning a print origin or reference point to match substrate placement
- Provides measurement of features and locations
- Provides inspection and image capture of printed pattern or drops
- Provides cartridge alignment when using multiple cartridges
- Allows matching drop placement to previously patterned substrate
Cartridge
- Type: Piezo-driven jetting device with integrated reservoir and heater Usable Ink
- Capacity: Up to 1.5 ml (user-fillable)
- Materials Compatibility: Many water-based, solvent, acidic or basic fluids
- Not Available after August 30, 2019
– Nozzles: 16 nozzles, single row, 100 dpi
– Drop Volume: 1 (DMC-11601) and 10 (DMC-11610) picoliter nominal - New Cartridge Products to be available in 2020. Contact FUJIFILM Dimatix for more information
Control PC and Application Software
- Pre-loaded patterned templates
- Pattern preview
- Editors: Pattern, piezo drive waveform, cleaning cycle, substrate setting
- Bitmap (1 bit) files accepted
Replaceable Items
- Print cartridge with one-time user-fillable reservoir
- Cleaning station nozzle blotting pad
- Drop watcher fluid absorbing pad
DMP-2850
The Dimatix Materials Printer (DMP) is a benchtop materials deposition system designed for micro-precision jetting a variety of functional fluids onto virtually any surface, including plastic, glass, ceramics, and silicon, as well as flexible substrates from membranes, gels, and thin films to paper products. A complete turnkey system, the DMP facilitates developing and testing manufacturing processes and product prototypes. It also can be used for prototyping of products from flexible circuits, RFID tags and displays to DNA arrays, and wearable electronics. By employing inexpensive exchangeable cartridges that researchers can fill with their own fluid materials, the DMP system minimizes waste of expensive fluid materials, thereby eliminating the cost and complexity associated with traditional product development and prototyping.
The Dimatix Materials Cartridge is a cartridge-based inkjet printhead used with the DMP. Based on FUJIFILM Dimatix's proprietary Silicon MEMS technology, the Dimatix Materials Cartridge is designed for high- resolution, non-contact jetting of functional fluids in a broad range of applications. The cartridge can deposit features to fabricate products such as organic thin-film transistors (TFTs) and printed circuits. In biotechnology, the Dimatix Materials Cartridge allows researchers to closely pack large numbers of elements in DNA arrays, to permit more accurate and efficient analyses.
Contact Information
Corporate Office:
FUJIFILM Dimatix, Inc.
2250 Martin Avenue
Santa Clara, CA 95050
USA
Tel: (408) 565-9150
Fax: (408) 565-9151
Email:info@dimatix.com
www.dimatix.com
New Hampshire Facility:
FUJIFILM Dimatix, Inc.
109 Etna Road
Lebanon, NH 03766
USA
Tel: (603) 443-5300
Fax: (603) 448-9870
Email:info@dimatix.com
Dimatix Dmp Cartridge
Japan Office:
FUJIFILM Global Graphic Systems Co., Ltd. 2-26-30 Nishiazabu
Minato-ku, Tokyo 106-0031
Japan
Advanced Marking Strategy Division
Phone: +81 3 6419 0530
Fax: +81 3 6419 9840
E-mail:dmp_ffgs@ffgs.fujifilm.co.jp
Dimatix Inkjet Cartridge
Europe Office:
Tel: +44 7739 863 505
Fax: +44 870 167 4328
Email:euro@dimatix.com
Korea Office:
Email:mdkorea@dimatix.com
Taiwan Office:
Email:mdtaiwan@dimatix.com
Dimatix Cartridge Dmc-11610
The Dimatix Materials Cartridge is a snap-in replaceable printhead for the Dimatix Materials Printer. Based on FUJIFILM Dimatix' proprietary silicon MEMS technology, the Dimatix Materials Cartridge is designed for high-resolution, non-contact jetting of functional fluids in a broad range of applications.
A world first - FUJIFILM Dimatix has created a MEMS-based cartridge-style printhead that allows users to fill their own fluids and print immediately with the Dimatix Materials Printer in their own laboratory. To minimize waste of expensive fluids, each cartridge reservoir has a capacity of 1.5 ml. Cartridges can easily be replaced to facilitate printing of a series of fluids.
Dimatix Cartridges
The print cartridge consists of two components:
Dimatix Materials Cartridge
System Information
Dimatix Materials Printer (DMP)
- Flat substrate, xyz stage, inkjet deposition system
- Low cost, user-fillable piezo-based inkjet print cartridges
- Built-in drop jetting observation system
- Fiducial camera for substrate alignment and measurement Variable jetting resolution and pattern creation PC-controlled with Graphical User Interface (GUI) application software
- Capable of jetting a wide range of fluids
- Heated vacuum platen
- Cartridge cleaning station
- Includes software
Mechanical System
Printable area
– Substrate < 0.5 mm thickness: 210 mm x 315 mm (8.27 in x 12.4 in)
– Substrate 0.5 – 25 mm thickness: 210 mm x 260 mm (8.27 in x 10.2 in) Repeatability: ± 25 µm (± 0.001 in)- Substrate holder
– Vacuum platen
– Temperature adjustable; ambient to 60° C - System Footprint: 673 mm x 584 mm x 419 mm (26 in x 23 in x 16 in)
- Weight approximately 50.7 kg (111.8 lbs)
- Power 100-120/200-240 VAC 50/60 Hz 375 W maximum
- Operating range 15-40° C at 5-80% RH non-condensing
- Altitude up to 2000 mAltitude up to 2000 m
- Safety and EMC compliance
– Safety: NRTL Certified to EN 61010-1, UL 61010-1, CSA 22.2 No. 61010-1
– EMC: EN61326-1 Class A, FCC Part 15 Class A
Dimatix Materials Cartridge Price
Fiducial Camera
- Allows substrate alignment using reference marks
- Allows positioning a print origin or reference point to match substrate placement
- Provides measurement of features and locations
- Provides inspection and image capture of printed pattern or drops
- Provides cartridge alignment when using multiple cartridges
- Allows matching drop placement to previously patterned substrate
Cartridge
- Type: Piezo-driven jetting device with integrated reservoir and heater Usable Ink
- Capacity: Up to 1.5 ml (user-fillable)
- Materials Compatibility: Many water-based, solvent, acidic or basic fluids
- Not Available after August 30, 2019
– Nozzles: 16 nozzles, single row, 100 dpi
– Drop Volume: 1 (DMC-11601) and 10 (DMC-11610) picoliter nominal - New Cartridge Products to be available in 2020. Contact FUJIFILM Dimatix for more information
Control PC and Application Software
- Pre-loaded patterned templates
- Pattern preview
- Editors: Pattern, piezo drive waveform, cleaning cycle, substrate setting
- Bitmap (1 bit) files accepted
Replaceable Items
- Print cartridge with one-time user-fillable reservoir
- Cleaning station nozzle blotting pad
- Drop watcher fluid absorbing pad
DMP-2850
The Dimatix Materials Printer (DMP) is a benchtop materials deposition system designed for micro-precision jetting a variety of functional fluids onto virtually any surface, including plastic, glass, ceramics, and silicon, as well as flexible substrates from membranes, gels, and thin films to paper products. A complete turnkey system, the DMP facilitates developing and testing manufacturing processes and product prototypes. It also can be used for prototyping of products from flexible circuits, RFID tags and displays to DNA arrays, and wearable electronics. By employing inexpensive exchangeable cartridges that researchers can fill with their own fluid materials, the DMP system minimizes waste of expensive fluid materials, thereby eliminating the cost and complexity associated with traditional product development and prototyping.
The Dimatix Materials Cartridge is a cartridge-based inkjet printhead used with the DMP. Based on FUJIFILM Dimatix's proprietary Silicon MEMS technology, the Dimatix Materials Cartridge is designed for high- resolution, non-contact jetting of functional fluids in a broad range of applications. The cartridge can deposit features to fabricate products such as organic thin-film transistors (TFTs) and printed circuits. In biotechnology, the Dimatix Materials Cartridge allows researchers to closely pack large numbers of elements in DNA arrays, to permit more accurate and efficient analyses.
Contact Information
Corporate Office:
FUJIFILM Dimatix, Inc.
2250 Martin Avenue
Santa Clara, CA 95050
USA
Tel: (408) 565-9150
Fax: (408) 565-9151
Email:info@dimatix.com
www.dimatix.com
New Hampshire Facility:
FUJIFILM Dimatix, Inc.
109 Etna Road
Lebanon, NH 03766
USA
Tel: (603) 443-5300
Fax: (603) 448-9870
Email:info@dimatix.com
Dimatix Dmp Cartridge
Japan Office:
FUJIFILM Global Graphic Systems Co., Ltd. 2-26-30 Nishiazabu
Minato-ku, Tokyo 106-0031
Japan
Advanced Marking Strategy Division
Phone: +81 3 6419 0530
Fax: +81 3 6419 9840
E-mail:dmp_ffgs@ffgs.fujifilm.co.jp
Dimatix Inkjet Cartridge
Europe Office:
Tel: +44 7739 863 505
Fax: +44 870 167 4328
Email:euro@dimatix.com
Korea Office:
Email:mdkorea@dimatix.com
Taiwan Office:
Email:mdtaiwan@dimatix.com
Dimatix Cartridge Dmc-11610
The Dimatix Materials Cartridge is a snap-in replaceable printhead for the Dimatix Materials Printer. Based on FUJIFILM Dimatix' proprietary silicon MEMS technology, the Dimatix Materials Cartridge is designed for high-resolution, non-contact jetting of functional fluids in a broad range of applications.
A world first - FUJIFILM Dimatix has created a MEMS-based cartridge-style printhead that allows users to fill their own fluids and print immediately with the Dimatix Materials Printer in their own laboratory. To minimize waste of expensive fluids, each cartridge reservoir has a capacity of 1.5 ml. Cartridges can easily be replaced to facilitate printing of a series of fluids.
Dimatix Cartridges
The print cartridge consists of two components:
Dimatix Materials Cartridge
- Fluid Module (bag, valve, pressure, system)
- Jetting Module (MEMS jetting structure, heater, thermistor, electrical connection, fluid connection)
